| BRAND | Steimel |
| Product | BT1-A031R / T1-60G |
| Internal code | IMP4625873 |
| Custom code | 84136039 |
| Technical specification | pump free shaft ATEX gear pump PTFE, GD, EC, AW, G3/4, M37GN/10+K+R, preb.f.KL (YBX469), GGK shaft Gear pumps: T1-60G according to Directive 2014/34/EU (ATEX) Item number: BT1-A031R Dimension sheet: DPP001-A031R Spare parts list (pump only): DET001-A031R Operating instructions: DBA-ZP02 + DBA-ZP-ATEX-01 Suction and discharge connection: G ¾ Material finish: Housing parts: EN-GJL-250 (EN-JL 1040) Drive and counter pinion: 16 MnCrs 5, hardened straight-toothed Shaft seal: mechanical seal M 37 GN/10+K+R Q12Q1KGG1 Elastomers of the mechanical seal: Kalrez temperature monitoring on the mechanical seals: prepared for1 PTC thermistor Display device: on-site Bearing Bushings: Bronze AW increased bearing clearance: without Case seal: Loctite other elastomers: PTFE Extraction hole: without Pumped medium: paints and varnishes solvent-based, pigment-containing, max. 100 μm grain size Concentration: 10 - 70% Viscosity: 1,000 - 2,000 mm2/s Temperature: max. 70 degrees C rinsing with solvent (viscosity 30 - 1000 mm2/s) approx. 10% of the passage of time Delivery data: Q: 0 - 300 L/h p: 0 - 3 bar (pump must suck) n: 0 - 250 rpm direction of rotation: right Test run: yes, with HLPD 46 Pre-cleaning: rinse with mineral spirits Paint: RAL 5009 (HDE) Silicone-free pump! The pump was tested with mineral oil and must be flushed on site before commissioning! Sign: EAY924-PL02 Identification plate: ETY924-D-E—PE03 ATEX marking: II 2G Ex h IIB T3 Gb X Please observe the provisions of Directive 2014/34/EU (ATEX) regarding the use of our pumps in hazardous areas. Prerequisite for operation according to: Ex zone 1 (gas), temperature class T 3, Ambient temperature -20 to 40°C Explosion group IIB. Attention: Before starting the pump, the temperature monitoring can be connected functionally! |
Please Contact Us to Order to offer competitive prices and delivery time for Steimel - BT1-A031R / T1-60G number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Peru Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
AC motor
Drehstrommotor
AC motor 090-04, IE2 B5 1.5 kW, 1500, 230 / 400V, 50Hz, IP55, Iso.F Nameplate stamping IE2: - 230/400 volt 50 Hz - 1.5 kW - 265/460 volt 60 Hz - 1.7 kW Engine with additional rating plate without CE and IE2 marking: - 220-240 / 380-420 volts at 50/60 Hz - 250-280 / 440-480 volts at 60 Hz
(Three-phase motor 090-04, IE2 B5 1.5 kW, 1500, 230 / 400V, 50Hz, IP55, Iso.F)
AC motor
Three-phase standard motor
heater 1500w 400v
Motor
gear pump
P-SF3 / 50RD-VL, gear pump, 2-18 bar matching engine IEC 132, B5 V1, sound-optimized or Gear pump: SF 3/50 RD - VL Article no. : PSF3 / 50RD-122458R Dimension sheet: DPA053D-132LM-R31 Spare Parts List: DET053050RD - 165R Suction and. Pressure connection: SAE 1 1/2 Housing parts: EN-GJL-250 (GG-25) Pinion shafts, noise opti. : 16MnCrS5, egh, schrägverz.. Storage: multilayer MD Shaft seal: radial shaft seal Elastomers: FKM Medium: Oil Viscosity: 50-5000 cSt Temperature: 10-60 ° C Flow rate: about 70.8 l / min. Pressure: 5 bar Rotational speed 1450 1 / min. Pressure relief valve Opening pressure: 12 bar Setting range: 2-18 bar Rotation: right Test run: yes, with HLPD 46 Coupling: BKUA065-1938-301 Bellhousing: BLA053300150LA21 suitable for three-phase motor Size / Design: IEC 132 / V 1 Painting: Primed (HDO058) green Nameplate: ETY924 D / E - PE01
gear pump
gear pump
gear pump
(P-TF10-120GDG Z-Pumpe 14-20 bar FKM,GD,EC-HA,MD,M3/45+V+R)
gear pump
Gear pump unit
Gear pump unit SF 2/20 RD-LFM
Gear Pump
gear pump
Pumpenaggregat
pump
Pump lubrication
GEAR PUMP LP C/W 1.5KW MOTOR
Pump unit